	Home
	Services
	Products
	About Us
	Contact Us
	Site Map

Products

Force Transducers / Load Cells

Listed below is our FORCE LOGIC UK range of load cells.

These load cells are manufactured to the highest standards, providing precision and reliability for the measurement of static and dynamic forces over the long term. Suitable for all high accuracy force measurement / load monitoring / weighing applications.

All products are supplied with a 5-point calibration as standard.

If these products cannot be incorporated into the application due to size limitations or inability to mate standard fixings, we are able to provide bespoke solutions to suit the application, preventing the need for mechanical or structural modifications.

All transducers can be supplied with a range of output options – low level mV output, amplified analogue output (voltage or current), or digital output.

	FSB Universal S Beam Load Cell. 10N to 100kN High accuracy stainless steel load cell (aluminium alloy 10N to 1kN). Tension or compression operation. High overload capacity and low sensitivity to off-axis loads. Combined error < 0.03% Full Scale Integral 3m cable, 6 Wire connection (optional connector) Excellent linear accuracy

	LPU Universal Low Profile Load Cell. 10kN to 500kN High accuracy stainless steel load cell. Low height relative to capacity. Tension or compression operation. High impact load, eccentric load and overload capacity, excellent resistance to off axis loads. Single or multiple bridge options. Sizes, fixings and load ranges can be modified for special requirements. Combined error < 0.05% Full Scale Chassis connector & 5m cable as standard, 6 Wire connection High repeatability performance High cycle life, long term resistance to fatigue

	CCL Universal Column Load Cell. 100kN to 500kN High capacity column load cell. Small diameter relative to capacity. Tension or compression operation. High impact load, fatigue rated. Single or multiple bridge options. Sizes, fixings and load ranges can be modified for special requirements. Combined error < 0.2% Full Scale Output Chassis connector & 5m cable as standard, 6 Wire connection High cycle life, long term resistance to fatigue

	Mounting Accessories To ease installation and product sourcing for the user, a vast range of both standard and non-standard fixings are available. These can be supplied separately or fitted and calibrated with the transducer system.

Bespoke Products / OEM solutions

If your application cannot accept a standard product, we are always interested to discuss requirements for bespoke products, from one-off's, through to prototyping and manufacture of specific OEM products. Please contact us with your requirement.

Instruments & Signal Conditioning

As with all products, instruments can be supplied as components, or calibrated with sensors for simple system integration.

	INT Load / Force / Weight Indicator Cost effective 1/8 DIN indicator/controller for all monitoring and control applications. 5-Digit display 16 bit ADC 10Vdc sensor excitation to 120mA (up to 6 x 350ohm load cells) with Sense facility Wide input signal range Accuracy +/- 0.05% Full Scale Analogue output options : 0 - 10V, -5V - +5V, 4 - 20mA Serial output options : RS232, RS422 (1200 baud), RS485 Optional panel meter or bench meter

	DFI Calibration Grade Force Indicator For applications which require a high degree of precision. 6-Digit display 20 bit ADC Stabilised 10Vdc sensor excitation with Sense facility Wide bi-polar input signal range Accuracy < +/- 0.001% Full Scale Serial output port Analogue output options : 0 - 10V, 4 - 20mA
	LCI In-Cell Strain Gauge Amplifier Miniature analogue amplifier for fitment inside strain gauge sensors. Suitable for simple integration of sensors to analogue input instruments, or where long cable runs are required. Output options : 0 - 5V, 0 - 10V, -10V - +10V, 4 - 20mA 24Vdc supply High stability Adjustable gain & zero CE approved

We can also supply custom signal conditioners, high visibility displays, telemetry systems.

For further details of our product range, please contact us.